TM-1 Pump

Category:

TM-1 Pump: TM-1 Lubricators are utilized in centralized lubricating systems of the single line resistance type. These systems measure the amount of oil released from the lubricator using cyclic delivery meter units. Lubricator is a spring-discharge piston pump powered by a motor. The pump piston’s operational cycle time is set by a gear reduction built into the motor.

View Data Sheet
View INJ Data Sheet

SKU: 15180

TM-1 Pump

The pump is powered by a motor that includes a gear reduction system, which sets the piston’s cycle time.

 

Usage:
The TM-1 Automatic Cyclic Lubricator is designed mainly for single line metering (resistance) systems. It’s particularly effective for precisely delivering oil to various friction points.

 

Pressure Range for Discharge:
The output pressure varies based on the lubrication system used. With metering resistance devices in a single line system, the pressure usually falls between 20-50 PSI (1.4 – 3.5 bar). Systems with just one discharge line tend to produce minimal pressure.

 

Description Part #
GASKET CHECK VALVE A3844
GASKET INLET VALVE A4191
COUPL ASSY THRU 5/32 TBG B3108
VALVE CHECK ASSY 2LB B3344
VALVE CHECK ASSY B4359
BODY PISTON VALVE ASSY MTM1-1 B7378
NUT PUMP BODY TM1 B7389
GEAR BEVEL TM1 B7823
GEAR BEVEL TM1 B7824
COVER ASSY MOTOR BLK LUB TM1 B7827
GASKET RES B8216
CAP FILLER PLASTIC B9230C
RESERVOIR SERVICE KIT 1PINT D3086C-KIT
SCREW MACH FIL HD 6-32 STEEL HS195
SCREW SET HOL HEX 8-32 CUP PT HS209
SCREW SET HOL HEX 8-32 CUP PT HS210
FILTER SERVICE GROUP KIT L S178
Dimensions 155 × 114 × 156 mm

Reviews

There are no reviews yet.

Be the first to review “TM-1 Pump”

TM-1 Pump

The pump is powered by a motor that includes a gear reduction system, which sets the piston’s cycle time.

 

Usage:
The TM-1 Automatic Cyclic Lubricator is designed mainly for single line metering (resistance) systems. It’s particularly effective for precisely delivering oil to various friction points.

 

Pressure Range for Discharge:
The output pressure varies based on the lubrication system used. With metering resistance devices in a single line system, the pressure usually falls between 20-50 PSI (1.4 – 3.5 bar). Systems with just one discharge line tend to produce minimal pressure.

 

Description Part #
GASKET CHECK VALVE A3844
GASKET INLET VALVE A4191
COUPL ASSY THRU 5/32 TBG B3108
VALVE CHECK ASSY 2LB B3344
VALVE CHECK ASSY B4359
BODY PISTON VALVE ASSY MTM1-1 B7378
NUT PUMP BODY TM1 B7389
GEAR BEVEL TM1 B7823
GEAR BEVEL TM1 B7824
COVER ASSY MOTOR BLK LUB TM1 B7827
GASKET RES B8216
CAP FILLER PLASTIC B9230C
RESERVOIR SERVICE KIT 1PINT D3086C-KIT
SCREW MACH FIL HD 6-32 STEEL HS195
SCREW SET HOL HEX 8-32 CUP PT HS209
SCREW SET HOL HEX 8-32 CUP PT HS210
FILTER SERVICE GROUP KIT L S178
Dimensions 155 × 114 × 156 mm
[INSERT_ELEMENTOR id="15807"]

Reviews

There are no reviews yet.

Be the first to review “TM-1 Pump”
logo 1
GSA Contract number – 47QSWA23D009L
UEI JB7TKBWE71C7
CAGE -3G2F1
Skip to content